ORNATE DOUBLE GATES:
Click on pictures for Ornate gate dimensions
Q / How far apart do I need the posts or pillars on a Ornate double gate?
A / You will need to allow minimum 70mm per hinge gap between gate and post and in the middle between the leafs gap 5mm-10mm
Example: Between posts or pillars would be the gate width plus 145mm to 150mm
Q / How high do I need my posts?
A / On the hinge side, at least the height of the gate plus any clearance at bottom of the gate.
Example: Bottom gap 35mm + height of hinge side of the gate, floor to top of post.
NOTE* If you are under ground automating, you will need to adjust the height of the post to allow for the automation recommended floor clearance.
You will find hardware technical drawings click here or you can contact us for the installation instruction with the sizes, state on message the RMG number of the product ie RMG001 or RMG002
See Ornate Gates Installation Manuals Here RMG010DG RMG011DG or RMG012DG
